Emergency-Stop Push Button; Main Switch; Drilling Table; Personal Protective Equipment - Optimum OPTi drill DX 17V Operating Manual

you have verified that there is no danger to personnel or objects.

1.9

Emergency-stop push button

ATTENTION!
Also after pressing the EMERGENCY-Stop switch, depending on the previously selected
speed, the drilling spindle continues to turn for a few more seconds .
1.10

Main switch

WARNING!
Dangerous voltage even if the main switch is switched off.
The areas marked by the pictogram might contain live parts, even if the main switch is
switched off.
In the "0" position, the main switch can be secured against accidental or non-authorised switch-
ing on. The power supply is interrupted by switching off the main plug.
1.11

Drilling table

Seats for T-slots are attached to the drilling table.
WARNING!
Risk of injury due to workpieces flying off at high speed. Securely fix the workpiece on
the drilling table.
1.12

Personal protective equipment

For certain work individual protection gear as protective equipment. This includes:
Safety helmet,

protective glasses or face guard,

protective gloves,

safety shoes with steel toe caps,

ear protection.

Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause illness.
Clean your personal protective equipment
after each use,

regularly once a week.

Personal protective equipment for special works
Protect your face and your eyes: Wear a safety helmet with facial protection when performing
work where your face and eyes are endangered.
Use protective gloves when handling pieces with sharp edges.
Wear safety shoes when you assemble, disassemble or transport heavy components.
EN
DX17V
42 Translation of original operating manual
Safety
Version 2.0.2 - 2022-06-28