Liability Claims For Defects / Warranty; Advice For Disposal / Options Of Re-Use - Optimum OPTIDRILL B 17PRO Operating Manual

9.4

Liability claims for defects / warranty

Beside the legal liability claims for defects of the customer towards the seller the manufacturer
of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not grant
any further warranties unless they are listed below or had been promised in the frame of a
individual contractual agreement.

The processing of the liability claims or of the warranty is performed as chosen by
OPTIMUM GmbH either directly or through one of its dealers.
Any defective products or components of such products will either be repaired or
replaced by components which are free from defects. The property of replaced prod-
ucts or components passes on to OPTIMUM GmbH.

The automatically generated original proof of purchase which shows the date of purchase,
the type of machine and the serial number, if applicable, is the precondition in order to
assert liability or warranty claims. If the original proof of purchase is not presented, we are
not able to perform any services.

Defects resulting from the following circumstances are excluded from liability and warranty
claims:
- Using the product beyond the technical options and proper use, in particular due to over-
straining of the machine
- Any defects arising by one's own fault due to faulty operations or if the operating manual
is disregarded
- Inattentive or incorrect handling and use of improper equipment
- Non-authorised modifications and repairs
- Insufficient installation and safeguarding of the machine
- Disregarding the installation requirements and conditions of use
- Atmospheric discharges, overvoltage and lightning strokes as well as chemical influ-
ences

The following items are as well not subject to the liability or warranty claims:
- Wearing parts and components which are subject to a standard wear as intended such
as e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
- Non reproducible software errors

Any services which OPTIMUM GmbH or one of its servants performs in order to fulfil in the
frame of an additional guarantee are neither an acceptance of the defects nor an accept-
ance of its obligation to compensate. Such services do neither delay nor interrupt the war-
ranty period.

Place of jurisdiction among traders is Bamberg.

If one of the above mentioned agreements is totally or partially inefficient and/or null, it is
considered as agreed what is closest to the will of the warrantor and which remains in the
framework of the limits of liability and warranty which are predefined by this contract.
9.5

Advice for disposal / Options of re-use

Please dispose of your machine in an environmentally friendly way, not by disposing of the
waste not in the environment, but by acting in a professional way.
Please do not throw away the packaging and the used machine later on, but dispose of your
material according to the guidelines established by your municipality or by the responsible
waste management company.
Annex
Version 2.0.2 2014-11-04 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
B17Pro | B23Pro | B26Pro | B33Pro GB
Page 75