Table of Contents
Advertisement
1.12
Drilling table
Seats for T-slots are attached
to the clamping table.
WARNING!
Risk
of
injury
workpieces flying off at high
speed.
Securely
workpiece on the drilling
table.
1.13
Separating protective devices
1.13.1 Protective cover of the V-belts
A protective cover for the belt
pulleys is mounted on the dril-
ling head. There is a switch
integrated
in
the
cover which monitors that the
cover is closed.
INFORMATION
The machine cannot be star-
ted, if the protective cover is not
closed.
1.13.2 Drill chuck guard
Adjust the guard to the correct height
before you start working.
To do so, slacken the clamping
screw, set the required height and re-
tighten the clamping screw.
There is a switch integrated in the
spindle protection mounting which
monitors the closed position.
INFORMATION
The machine cannot be started, if the
drill chuck guard is not closed.
Safety
Version 2.0.1 - 2020-7-17
due
to
fix
the
Seat for
t-slot
Abb.1-2:
Protective
cover
protective
Abb.1-3:
Clamping screw
Drill chuck guard
Translation of the original instructions
Drilling table
Protective cover
Abb.1-4:
Drill chuck guard
B16H
GB
13
Advertisement
Table of Contents
