Other Pictograms; Intended Use - Optimum OPTIDRILL B 17PRO Operating Manual

1.1.2 Other pictograms

Activation forbidden!
Use protective boots!
1.2

Intended use

The drilling machine is designed and manufactured for holes in cold metals or other non flam-
mable materials or that not constitute a health hazard using a rotating filing-stripping tool that
has a number of grooves for collecting the filings.
The drilling machine may only be operated with tools whose cutting edge arrangement forms a
force couple around the rotational axis in engagement.
A quick-action drill chuck for holding the tools is provided as standard. The drilling machine
must only be used with a quick-action drill chuck.
If the drilling machine is used in any way other than described above, modified without the
approval of the company Optimum Maschinen Germany GmbH then the drilling machine is
being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that you

observe the limits of the drilling machine,

the operating manual is observed,

inspection and maintenance instructions are observed.
WARNING!
Extremely severe injuries.
It is forbidden to make any modifications or alternations to the operation values of the
drilling machine! They could endanger the staff and cause damage to the drilling
machine.
INFORMATION
The drilling machine B23Pro Vario, B26Pro Vario, B33Pro Vario is built according to the
standard DIN EN 55011 class A.
WARNING!
The class A (machine tools) is not intended to be used in residential facilities, where the
power is supplied via a public low voltage supply system. In these areas it may possibly
Safety
Version 2.0.2 2014-11-04
Disconnect the Use protective
mains plug!
Use protective suit! Protect the environ-

Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Use ear protection!
glasses!
Contact address
ment!
"Technical data" on page 19
B17Pro | B23Pro | B26Pro | B33Pro
Use protective gloves!
Operations
not in accord-
ance with
intended use!
GB
Page 9