Inspection And Maintenance - Optimum OPTIDRILL B 17PRO Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
6.2

Inspection and maintenance

The type and level of wear depends to a large extent on the individual usage and operating
conditions.
Interval Where?
Start of shift
after every
maintenance
or repair work
every week
Every month
GB B17Pro | B23Pro | B26Pro | B33Pro
Page 44
What? How?

"Safety check" on page 15

Check if the slide rail screws for the V-belt tension on the
left and right side of the drilling head are well fastened.

Check if the V-belts are well tightened. Checking the ten-
sion of V-belts,
Loosening

Lubricate the drill column regularly with commercial oil.

Lubricate the rack regularly with commercial grease (e.g.
friction bearing grease).
lubricate
Original operating instructions

"Speed change" on page 33.
Version 2.0.2
Slide rail screws
right-hand side
Drilling column
Toothed rack
Maintenance
2014-11-04