Safety During Operation; Safety During Maintenance; Disconnecting And Securing The Drilling Machine; Using Lifting Equipment - Optimum OPTIDRILL B 17PRO Operating Manual

Bench drilling machine, upright drilling machine
Table of Contents

Advertisement

1.15

Safety during operation

We specially point out the specific dangers when working with and on the drilling machine.
WARNING!
Before switching on the drilling machine make sure that there are
no dangers generated for persons,
not cause damage to equipment.
Avoid any risky working practices:
Make sure your work does not endanger anyone.
The instructions mentioned in these operating instructions have to be strictly observed dur-
ing assembly, operation, maintenance and repair.
Do not work on the drilling machine, if your concentration is reduced, for example, because
you are taking medication.
Observe the accident prevention regulations issued by your Employers Liability Insurance
Association or other competent supervisory authority, responsible for your company.
Inform the supervisor about all endangerments or errors.
Use the prescribed personnel protective equipment. Make sure to wear a well-fitting work
suit and, if necessary, a hairnet.
Do not use protective gloves when drilling or milling.
1.16

Safety during maintenance

Inform the operators in good time about any maintenance and repair works.
Report all safety relevant changes and performance details of the drilling machine or their oper-
ational behavior. Document all changes, have the operating instructions updated accordingly
and train machine operators.

1.16.1 Disconnecting and securing the drilling machine

Unplug the main switch before starting any maintenance or repair work. All machine compo-
nents and hazardous voltages and movements must have been disconnected.
Attach a warning sign on the machine.

1.16.2 Using lifting equipment

WARNING!
The use of unstable lifting and load suspension gear that might break under load can
cause severe injuries or even death.
Check that the lifting and load suspension gear devices
they have sufficient load carrying
and that it is in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other competent supervisory authority, responsible for your
company.
Fasten the loads properly.
Never walk under suspended loads!
Safety
Version 2.0.2
2014-11-04
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
Report
changes
and docu-
ment these
B17Pro | B23Pro | B26Pro | B33Pro
GB
Page 17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optidrill b 23proOptidrill b 23pro varioOptidrill b 26pro varioOptidrill b 33pro varioOptidrill b 26proOptidrill b 33pro

Table of Contents