YASKAWA A1000 Technical Manual page 80

4.2 The Drive and Programming Modes
n Using the LO/RE Key on the Digital Operator
1. Turn on the power to the drive. The initial display appears.
Press . The LO/RE light will light up. The drive is now in LOCAL.
2.
To set the drive for REMOTE operation, press the
n Using Input Terminals S1 through S8 to Switch between LOCAL and REMOTE
It is possible to switch between LOCAL and REMOTE modes using one of the digital input terminals S1 through S8 (set the
corresponding parameter H1-oo to "1").
Refer to Parameter List on page 175
Note: Setting H1-oo to 1 disables the LO/RE key on the digital operator.
80
Step
key again.
for a list of H1-oo digital input selections when setting multi-function input terminals.
YASKAWA ELECTRIC TOEP C710616 41B YASKAWA AC Drive - A1000 Quick Start Guide
Display/Result
- MODE - DRV Rdy
FREF (A1/A2)
U1-01= 0.00Hz
U1-02= 0.00Hz RSEQ
U1-03= 0.00 A RREF
JOG FWD FWD/REV
DIGITAL OPERATOR JVOP-180 ALM
- MODE - DRV Rdy
FREF (OPR)
U1-01= 0.00Hz
U1-02= 0.00Hz LSEQ
U1-03= 0.00 A LREF
JOG FWD FWD/REV
F1 F2
LO
ESC
RE
RESET ENTER
RUN STOP