CL5
MY16-EX
MY16-EX
NAI48-ES
DIGITAL
OUT A
connector
DIGITAL OUT
A connector
DIGITAL OUT
A connector
Audio signal
Remote signal
MY16- ES64
HA REMOTE connector
HA REMOTE 1 connector
AD8HR 1
HA REMOTE 2 connector
HA REMOTE 1 connector
AD8HR 2
HA REMOTE 2 connector
HA REMOTE 1 connector
AD8HR 3
HA REMOTE 2 connector
Up to six units
Connecting the CL series console to an SB168-ES
To remotely control the SB168-ES from the CL series console, install an MY16-ES64
EtherSound card in Slot 1 of the CL, then use an Ethernet cable to connect the CL to the
SB168-ES. This connection enables you to remotely control the SB168-ES from the CL series
console.
Alternatively, you can use a daisy chain or ring connection and install two MY16-EX
expansion cards in the slots on the CL unit to remotely control up to three SB168-ES units
simultaneously.
NOTE
Remote control data will be received and transmitted only at Slot 1 of the CL series console.
◆ Daisy chain network
CL5
MY16-
MY16-
ES64
EX
OUT
IN
SB168-ES
OUT
IN
SB168-ES
OUT
IN
SB168-ES
161
I/O devices and external head amps
Audio signal
Remote signal
MY16-
EX
Reference Manual