Yamaha CL5 Reference Manual page 255

Message
SURROUND MODE ON.
The console has switched to Surround mode.
Sync Error! [xxx] The CL series console is not synchronized to the [xxx] signal.
Tap operation was ignored because the TAP TEMPO button is not
Tap Operation Ignored.
displayed in the screen.
This operation has been ignored because the current user does not
This Operation is Not Allowed.
have permission.
This Operation is Not Allowed in This
This function is not allowed in this screen.
View.
Loading is not possible because the bitmap file is too large. The
maximum supported file size is 307,256 Bytes.
Too Large Files! Loading Failed.
Or loading is not possible because the bitmap file is too large. The
maximum supported file size is 1024 kilobytes.
Too Many Bands Used! Cannot Copying 31BandGEQ and comparing it to Flex15GEQ has failed
Compare. because more than 15 bands are included in the copy source.
Too Many Bands Used! Cannot Paste to Copying and pasting 31BandGEQ to Flex15GEQ has failed because
Flex15GEQ. more than 15 bands are included in the copy source.
Power consumption of the I/O cards installed in the slots has
Total Slot Power Capability Exceeded!
exceeded the rated value.
Your operation has been ignored because there is no parameter that
Unassigned Encoder.
corresponds to the knob you operated.
Unit Fan has Malfunctioned The fan in the R series console has malfunctioned.
Unit ID Duplicated! The UNIT ID is duplicated on the Dante audio network.
The file you attempted to load from the USB flash drive is of an
Unsupported File Format!
unsupported format.
USB Currently Active for Recorder
Save or Load operations are unavailable because the USB memory
function! recorder is recording or playing.
The recorder cannot operate, since mixer scene memory or library
USB Currently Active for SAVE or LOAD!
data is being saved to or loaded from the USB flash drive.
Recording/playback stopped because time is required for USB flash
USB Memory Busy: Recorder Stopped!
drive processing.
Can't save the RECORDER playlist because there is insufficient free
USB Memory Full !
space on the USB flash drive.
Recorder processing was halted because the USB flash drive
USB Memory Full! Recorder Stopped.
capacity ran out while the USB memory recorder was operating.
USB Memory is Protected! The USB flash drive's Protect setting is turned on.
USB Memory Unmounted! Recorder
Recorder processing was halted because the USB flash drive was
Stopped. disconnected while the USB memory recorder was operating.
USB over current Error! Disconnect USB The USB device was disconnected because of excessive USB
device.
current.
The bank for the USER DEFINED KEY has switched to [x]. (x is A, B,
USER DEFINED KEY BANK CHANGED [x].
C, or D.)
Version Changed. All Memories were
The current memory was initialized when the version was updated.
Initialized.
Version mismatch. The versions of this console and the R series console do not match.
Meaning
252
Message
Recorder was halted because synchronization to the word clock was
Word Clock Error! Recorder Stopped!
lost.
Wrong Audio File Format!
The format of the audio file is invalid.
Wrong Password! The password you input was incorrect.
The CL series console cannot synchronize because the source
Wrong Word Clock! selected by MASTER CLOCK SELECT in the WORD CLOCK screen
is not appropriate.
The current user does not have permission to create a user
You Cannot Create User Key.
authentication key.
Warning/Error Messages
Meaning
Reference Manual