Yamaha CL5 Reference Manual page 108

MONITOR window
You can make detailed settings for monitoring. This window appears when you press the
MONITOR display button or meter field in the MONITOR screen.
3
2 4
1
5 A
◆ SOURCE SELECT field
This field enables you to select the source signal for the MONITOR bus.
1
Source selection buttons
Select one of the following as the signal source that will be output to the MONITOR
STEREO L/R STEREO L/R channel signals
MONO (C) MONO channel signal
LCR STEREO L/R + MONO channel signals
OMNI 1-2 - 7-8 OMNI IN jacks 1 - 8 signals (per two channels)
PB OUT
Recorder's PLAYBACK OUT signals
DEFINE The signal(s) selected in the ASSIGN field
B
6 7 8
9
D
E
F
0 C
◆ DIMMER field
This field enables you to make settings for the Dimmer function, which temporarily attenuates
monitor signals.
2
DIMMER knob
Adjusts the amount by which monitor signals will be attenuated when the Dimmer
function is on.
3
DIMMER ON/OFF button
Switches the Dimmer function on or off.
4
TALKBACK DIMMER knob
Adjusts the amount by which the monitor level will be attenuated when talkback is on.
5
TALKBACK ON indicator
Indicates the talkback on/off status.
6
PHONES LEVEL LINK button
Enables you to link the signal level at the PHONES Out jack to the monitor signal level.
Turn on this button to adjust the level of signals sent to the PHONES Out jack by using
the MONITOR FADER LEVEL knob
been assigned.
NOTE
If the PHONES LEVEL LINK button is ON, use the MONITOR LEVEL knob and the monitor fader,
as well as the PHONES LEVEL knob to adjust the monitor level when monitoring through
headphones.
7
CUE INTERRUPTION button
Press this button to interrupt the monitor signal by the cue signal. If this button is on
and the cue is enabled, the cue signal will be sent to the monitor output. With the
factory default settings, this function is turned on. If you do not wish to send the cue
signal to the monitor output, switch this button
8
MONO MONITOR button
Turn on this button to switch the monitor output signal to mono.
bus.
9 MONITOR OUTPUT button
This button turns the monitor output on/off. When this button is turned on, the monitor
1
source selected in is sent to output destination
NOTE
The PHONES output jack will always output the monitor signal, regardless of whether
the OUTPUT button is on or off.
105
Monitor and Cue functions
0 A
or the fader to which this knob function has
off.
E
.
Reference Manual