Input/Output Characteristics; Analog Input Characteristics; Digital Output Characteristics; Analog Output Characteristics - Yamaha CL5 Reference Manual

Input/output characteristics

ANALOG INPUT CHARACTERISTICS

Actual For Use
Input
GAIN Load With
Terminals
Impedance Nominal
50-600Ω
+66dB
OMNI IN Mics &
7.5kΩ
1-8 600Ω
-6dB
Lines
50-600Ω
+64dB
(0.245mV)
Mics &
TALKBACK 10kΩ
600Ω
+20dB
Lines
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal
output level when the unit is set to maximum gain. (all faders and level controls are
maximum position.)
*2. XLR-3-31 type connectors are balanced. (1= GND, 2= HOT, 3= COLD)
* In these specifications, 0dBu= 0.775 Vrms.
* All input AD converters are 24bit linear, 128times oversampling.
* +48V DC ( phantom power ) is supplied to ONI IN (1-8) and TALKBACK XLR type
connectors via each individual software controlled switches.

ANALOG OUTPUT CHARACTERISTICS

Actual
For Use
Output Source GAIN
With
Impedanc SW
Terminals
Nominal
e
+24dB
(default)
OMNI 600Ω
75Ω
OUT 1-8 Lines
+18dB
8Ω
-
Phones
PHONES 15Ω
40Ω
-
Phones
*1. XLR-3-32 type connectors are balanced. (1= GND, 2= HOT, 3= COLD)
*2. PHONES stereo phone jack is unbalanced. (Tip= LEFT, Ring= RIGHT, Sleeve= GND)
*3. There are switches inside the body to preset the maximum output level.
*4. The position of the level control is 10dB lowered from Max.
* In these specifications, 0dBu= 0.775 Vrms.
* All output DA converters are 24bit, 128times oversampling.
Input Level
Sensitivity
Max. before
Nominal
*1
clip
-82dBu -62dBu -42dBu
(61.6μV) (0.616mV) (6.16mV) XLR-3-31 type
-10dBu +10dBu +30dBu
(Balanced)
(245mV) (2.45V) (24.5V)
-70dBu -60dBu -40dBu
(0.775mV) (7.75mV)
XLR-3-31 type
-26dBu -16dBu +4dBu (Balanced)
(38.8mV) (0.123V) (1.23V)
Output Level
Connector
Max. before
*3
Nominal
clip
+4dBu +24dBu
(1.23V) (12.3V)
XLR-3-32 type
-2dBu +18dBu (Balanced)
(616mV) (6.16V)
*4
150mW
75mW Stereo Phone Jack
(TRS)
(Unbalanced)
*4 150mW
65mW
DIGITAL INPUT & OUTPUT CHARACTERISTICS
Terminal Format
Primary/
Dante
Secondary
Connector

DIGITAL OUTPUT CHARACTERISTICS

*2
Terminal
DIGITAL
AES/EBU
*1
OUT
*2
*1. Channel Status of DIGITAL OUT
Byte Bit
0 Block Format
1 Mode
2-4 Emphasis
5 Fs Lock
0
6-7 Sampling Frequency
0-3 Channel Mode
1
4-7 Users Bit Management
0-2 Use of AUX
2
3-7 Source
3 0-7 Multi Channel
*1
0-1 Digital Audio Reference Signal
2 -
4
3-6 Sampling Frequency
7 Sampling Frequency Scan Flag
*2
*2. XLR-3-32 type connectors are balanced. (1= GND, 2= HOT, 3= COLD)
43
Data
Level Audio
length
24bit or 1000Base 64ch Input/64ch Output
32bit -T @48kHz
Data
Format Level
Length
24bit RS422 XLR-3-32 type (Balanced)
AES/EBU Professional Use
Field Name Fixed/Variable
fixed
variable
fixed
fixed
fixed
fixed
variable
fixed
Connector
EtherCON Cat5e
Connector
*2
Data Description
1 professional use
0 audio
0x4 off
0 lock
0x0 others
0x3 32 kHz
0x2 44.1 kHz
0x1 48 kHz
0x1 2ch mode
0x0 -
0x1 24 bits Audio Data
0x00 -
0x00 -
0x0
-
0
0x0 others
0 -
Data List