Yamaha CL5 Reference Manual page 204

FUNCTION PARAMETER 1 PARAMETER 2
STEREO L/R
MONO (C)
LCR
PB OUT
OMNI1-2
SOURCE SELECT
OMNI3-4
OMNI5-6
OMNI7-8
DEFINE
MONITOR
SURROUND SOURCE
*6)
SELECT
SURROUND DOWN-
STEREO MONO
MIX
SOLO
SURROUND SPEAKER
L, R, C, Ls, Rs, LFE
MUTE GROUP 1
: -
MUTE
MUTE GROUP 8
MASTER
ALL MUTE -
GO TO PROJECT START
GO TO PREV MARKER
NUENDO
TRANSPORT REWIND
LIVE
FAST FORWARD
GO TO NEXT MARKER
GO TO PROJECT END
CYCLE
STOP
TRANSPORT
START
NUENDO
REC
LIVE
EASY RECORDING
PEAK CLEAR -
ADD MARKER -
Description
Recall the selected signal to the monitor.
Recall the selected signal to the surround
monitor.
When this function is off (the lamp is off), the
setting returns to 5.1 monitor.
When this function is on (the lamp is on), the
SURROUND MONITOR screen opens. When this
function is off (the lamp is off), the SURROUND
MONITOR screen closes.
This functionality is the same as the SPEAKER
MUTE function in the SURROUND MONITOR
screen. When the SOLO button is on, it
functions as a SOLO key.
Switch MUTE GROUP MASTER on/off.
Turns all MUTE GROUP MASTER settings on/off
together.
Operate the transport functions of Nuendo Live.
Operate the transport functions of Nuendo Live.
Clear the peak indicators of the Nuendo Live
screen.
This function executes ADD MARKER of
NUENDO Live.
201
FUNCTION PARAMETER 1 PARAMETER 2
OSCILLATOR ON -
SELECTED CH ASSIGN -
OSCILLATOR
DIRECT ASSIGN *1)
BOOKMARK -
PAGE
CHANGE
BOOKMARK with "SEL" -
PREVIOUS PAGE
-
NEXT PAGE
CLOSE POPUP -
PLAY/PAUSE, STOP,
FF/NEXT,
REW/PREVIOUS, REC
TRANSPORT
AUTO REC
RECORDER
REC & START
NO ASSIGN
(TITLE 1)
DIRECT PLAY
:
INC RECALL -
SCENE
REC RECALL -
DIRECT RECALL SCENE #000-#300
RECALL UNDO -
STORE UNDO -
SCENE
INC -
DEC -
RECALL -
STORE -
MIX1-16/MIX17-24,
SEND MODE -
MATRIX
Setup
Description
Switch the OSC on/off.
While holding down this key, press a SEL key of
a channel to switch the assignment on/off.
During this time, the [SEL] LED will be lit if
assign is ON, or dark if OFF.
It goes OFF when the bank is switched.
Assign the oscillator to the channel selected
from list 1).
Memorize the currently-selected screen (hold
down the key for two seconds or longer), or
display the last-memorized screen (Hold down
the key, then release it within two seconds).
Popup windows can also be memorized. In the
case of a rack, the number of that rack is also
memorized.
Memorize the above BOOKMARK with the
addition of the SEL status.
Display the previous/next page.
Close the displayed window.
Recorder transport functions.
Shortcut function for STOP REC PLAY.
Recording will be initiated in a single action. If
this is executed during recording, the file being
recorded will first be closed, and then recording
will continue with a new file.
Start recording immediately without entering
record-ready mode.
The specified audio file will be played once from
the beginning.
Audio files to be played should be saved in the
SONGS folder inside the YPE folder. Please note
that a file cannot be specified if it is saved in the
root directory or in any other folder. When you
execute playback, the path in the TITLE LIST
screen will move to \YPE\SONGS\.
Recall the scene of the next existing number.
Recall the scene of the previous existing
number.
Directly recall the scene of the specified
number.
Execute RECALL UNDO.
Execute STORE UNDO.
Select the scene of the next existing number.
Select the scene of the previous existing number.
This function recalls the currently-selected scene.
Store the current settings.
If INPUT or ST IN is selected, switch the function
of the Selected Channel section's send encoders
from TO MIX1-16, TO MIX17-24, and MATRIX.
Reference Manual