Yamaha CL5 Reference Manual page 11

◆ FADER field
This field enables you to make settings for the channel on/off
status and the level.
1
Fader
Displays the current level.
Use the faders on the top panel to set the levels.
2
Level indicator
Displays the current level setting by numerical value. If
the signal is clipping at any point in the channel, the Σ CLIP indicator will light.
3
ON button
Switches the channel on and off. The button is linked with the corresponding [ON] key
on the top panel.
NOTE
For CL V2.0 and later, the TOUCH AND TURN function assigned to one of the USER DEFINED
knobs enables you to control the fader in the FADER field of the SELECTED CHANNEL VIEW
screen.
◆ DCA/MUTE field
This field enables you to select the DCA or mute group to which the
channel is assigned.
1 Tabs
Select a DCA or mute group. Press the selected tab once again
to open the DCA/MUTE GROUP ASSIGN MODE window.
When the DCA group tab is selected:
2
DCA group select buttons
Select the DCA group to which the channel is assigned.
3
Mute group indicators
Indicate the mute group to which the channel is assigned.
When the mute group tab is selected:
4
2
3
1
5
6
1
3
2
11
Mute group select buttons
Select the mute group to which the channel is assigned.
NOTE
If the dimmer level is set to the mute group, this button lights
orange.
SAFE button
Temporarily removes the channel from the mute group.
DCA group indicators
Indicate the DCA group to which the channel is assigned.
SELECTED CHANNEL section
5
6 4
Reference Manual