Functions That Can Be Assigned To The Assignable Encoders - Yamaha CL5 Reference Manual

Functions that can be assigned to the assignable
encoders
Function
PAN GAIN ASSIGN
O PAN/BALANCE
O ANALOG GAIN
O DIGITAL GAIN
O NO ASSIGN
O SELECTED SEND
O MIX1 SEND
O MIX2 SEND
O MIX3 SEND
O MIX4 SEND
O MIX5 SEND
O MIX6 SEND
O MIX7 SEND
O MIX8 SEND
O MIX9 SEND
O MIX10 SEND
O MIX11 SEND
O MIX12 SEND
O MIX13 SEND
O MIX14 SEND
O MIX15 SEND
O MIX16 SEND
O MIX17 SEND
O MIX18 SEND
O MIX19 SEND
O MIX20 SEND
O MIX21 SEND
O MIX22 SEND
O MIX23 SEND
O MIX24 SEND
O MATRIX1 SEND
O MATRIX2 SEND
O MATRIX3 SEND
O MATRIX4 SEND
O MATRIX5 SEND
O MATRIX6 SEND
O MATRIX7 SEND
PARAMETER 1 PARAMETER 2
PAN
BAL
A.GAIN *1
D.GAIN *1
(Nothing will be
displayed.)
MIX1-MTRX8
Depends on
*2
status
MIX1 *3
MIX2 *3
MIX3 *3
MIX4 *3
MIX5 *3
MIX6 *3
MIX7 *3
MIX8 *3
MIX9 *3
MIX10 *3
MIX11 *3
MIX12 *3
MIX13 *3
MIX14 *3
MIX15 *3
MIX16 *3
MIX17 *3
MIX18 *3
MIX19 *3
MIX20 *3
MIX21 *3
MIX22 *3
MIX23 *3
MIX24 *3
MTRX1 *3
MTRX2 *3
MTRX3 *3
MTRX4 *3
MTRX5 *3
MTRX6 *3
MTRX7 *3
PAN GAIN ASSIGN
O MATRIX8 SEND
O HPF FREQUENCY
O DYNAMICS1 THRESHOLD
O DYNAMICS2 THRESHOLD
O DIGITAL GAIN
O EQ ATT
O INPUT DELAY
O DIRECT OUT LEVEL
O SURROUND L-R PAN
O SURROUND F-R PAN
O SURROUND ROUND PAN
O SURROUND DIV
O SURROUND LFE
*1 Preference setting and the state of the ALTERNATE function will determine whether this will be analog gain or
digital gain.
*2 The send destination that is the target of Sends On Fader will be selected.
*3 The state of the ALTERNATE function will determine whether turning the encoder will switch the PRE/POST
setting of the corresponding send or will switch the corresponding send on/off when pressed.
*4 The state of the ALT function will determine whether pressing the encoder will switch the high-pass filter on/off.
*5 The state of the ALTERNATE function will determine whether pressing the encoder will switch DYNAMICS 1 on/off.
*6 The state of the ALTERNATE function will determine whether pressing the encoder will switch DYNAMICS 2 on/off.
*7 The state of the ALTERNATE function will determine whether turning the encoder will switch to F/R.
*8 The state of the ALTERNATE function will determine whether turning the encoder will switch to L/R.
207
Function
PARAMETER 1 PARAMETER 2
MTRX8 *3
HPF *4
THRE1 *5
THRE2 *6
D.GAIN
ATT
Units of scale
are m, ms, ft,
DELAY and fr. No
description for
samples.
D.OUT
L/R *7
F/R *8
L/R and F/R
DIV
LFE
Setup
Reference Manual