Controlling Dca Groups - Yamaha CL5 Reference Manual

◆ Selecting the DCA groups to which a specific channel will belong
STEP
1. Press the [SEL] key of the input channels and output channels that you want to
operate.
2. Press one of the knobs in the SELECTED CHANNEL section.
3. Use the DCA group select buttons in the SELECTED CHANNEL VIEW screen to select
the DCA group(s) to which the currently-selected channel will be assigned (multiple
selections are allowed).
SELECTED CHANNEL
VIEW screen

Controlling DCA groups

Use the faders of the Centralogic section to control DCA groups.
STEP
1. Assign input and output channels to DCA groups.
2. Using the faders in the Channel Strip section or Master section on the top panel,
adjust the relative balance between the input and output channels that belong to
the DCA group you want to use.
3. Use the Bank Select keys in the Centralogic section to select the [DCA 1-8] key or the
[DCA 9-16] key.
4. Use the Centralogic section to operate the DCA group.
NOTE
• You can also press the [DCA], [DCA 1-8], or [DCA 9-16] key in the Channel Strip section to select
the DCA group that you want to control.
• In the DCA member display on the OVERVIEW screen, you can use the multifunction knob in the
Centralogic section to scroll through channels when there are 15 or more channels assigned.
DCA/MUTE
field
◆ Using DCA groups
Use the Centralogic section to operate the DCA group.
• Level adjustment: Faders .... The level of the channels assigned to that DCA group
• On/Mute switch: [ON] key.... When you press an [ON] key in the Centralogic section
• Cue Monitor: [CUE] key ....... When you press the Centralogic section [CUE] key to
67
can be adjusted while preserving the level differences
of each channel. The input faders will not operate at
this time.
to make the key indicator go dark, the channels
assigned to that DCA group will be muted (the same
state as when the faders are lowered to the -∞ dB
position).
make it light, the [CUE] keys of the channels assigned
to that DCA group will blink, and cue monitoring will be
enabled. For more information about cue, refer to
"Using the Cue (page
function" 109).
Channel Job
Reference Manual