External Ha - Yamaha CL5 Reference Manual

◆ Ring connection
CL5
MY16- MY16- MY16-
ES64 EX EX
OUT
IN
SB168-ES
OUT
IN
SB168-ES
OUT
IN
SB168-ES
OUT
NOTE
Please refer to the SB168-ES Owner's Manual for information on setting up the MY16-ES64/
MY16-EX cards and EtherSound network.
Audio signal
Remote signal
Remotely controlling an external head amp
An external head amp ( "external HA" ) connected via MY16-ES64 or NAI48-ES can be
remotely controlled from the CL series console. For details on how to connect a CL series
console with an external head amp, refer to
external head amp's operating manual.
STEP
1. Connect the CL series console to an external HA.
2. In the Function Access Area, press the RACK button.
3. Press the EXTERNAL HA tab in the upper part of the VIRTUAL RACK screen.
4. Press the EXTERNAL HA PORT SELECT button for the corresponding rack in the
VIRTUAL RACK screen (EXTERNAL HA page).
5. Use the PORT SELECT buttons in the EXTERNAL HA PORT SELECT window to select
the input ports to which the audio output of the external HA is connected.
6. Press the CLOSE button to close the EXTERNAL HA PORT SELECT window.
7. In the VIRTUAL RACK screen (EXTERNAL HA page), press the rack in which the
external HA you want to control is mounted.
8. Remotely control the external head amp in the EXTERNAL HA window.
VIRTUAL RACK screen
(EXTERNAL HA page)
162
I/O devices and external head amps
"Using an external head
amp" (page 160) and the
Reference Manual