I/O Devices And External Head Amps; Using An I/O Device - Yamaha CL5 Reference Manual

I/O devices and external head amps

This chapter explains how to use an I/O device or an external head amp that is connected to
the CL series console. Before you proceed, use DANTE SETUP to specify the I/O devices
that will be mounted. For details, refer to
(page 231).

Using an I/O device

CL series consoles enable you to remotely control channel parameters of an I/O device (such
as an R series product) connected to the Dante connector.
I/O device patching
Here's how an I/O device connected to the Dante connector can be patched to the Dante
audio network.
STEP
1. Connecting CL series consoles and I/O devices
2. In the Function Access Area, press the I/O DEVICE button.
3. Press the DANTE PATCH tab in the upper part of the I/O DEVICE screen.
4. Press the DANTE INPUT PATCH button in the I/O DEVICE screen (DANTE PATCH
page).
5. Press the AUTO SETUP button.
If you want to edit individual patches, press the port select button.
6. Press the device in the I/O DEVICE screen (DANTE PATCH page).
7. Press the port select button in the OUTPUT PATCH window.
8. In the PORT SELECT screen, select the output port.
"Mounting an I/O device on the Dante audio
I/O DEVICE screen (DANTE PATCH page)
network"
1
1
I/O device list
This shows the ID number and model name of the I/O devices.
Press here to access the OUTPUT PATCH window, where you can specify patching from
the console's output ports to the I/O devices. If a previously set-up device does not
currently exist on the Dante audio network, a yellow "VIRTUAL" indicator is shown at
the lower left of that device. If devices on the network belong to different DEVICE TYPEs
but share the same ID, a red "CONFLICT" indicator will appear to the left, below the
device. If multiple devices share the same ID, a yellow "DUPLICATE" indicator will
appear to the right, below the device.
2
DANTE SETUP button
Press this button to open the DANTE SETUP window, in which you can make settings
for the audio network.
3
DANTE INPUT PATCH button
Press this button to open the DANTE INPUT PATCH window, in which you can select the
64 channels that will be input from the I/O device to the console.
4 OUTPUT PORT SETUP button
Press this button to access the PATCH VIEW 1 tab of the OUTPUT PORT window, where
you can choose the 64 channels that will be output from the console's output ports to
I/O devices.
154
I/O devices and external head amps
2
3
4
Reference Manual