Output Channels; Signal Flow For Output Channels - Yamaha CL5 Reference Manual

OUTPUT channels

This chapter explains output channels (MIX channels, MATRIX channels, STEREO channels,
MONO channels).

Signal flow for output channels

The output channel section takes the signals sent from the input channels to the various
buses, processes them with EQ and dynamics, and sends them to output ports or other
buses. The following types of output channels are provided.
MIX channels
These channels process signals sent from input channels to MIX buses, and output them to
the corresponding output port, MATRIX bus, STEREO bus, or MONO (C) bus.
M
O
ST N
MATRIX CUE
MIX
O
L R (C) 1 2 7 8 L R
1 2 2324
STEREO channel/MONO (C) channel
Each of these channels process the signal sent from the input channels to the STEREO bus
or MONO (C) bus, and send it to the corresponding output port or MATRIX bus. If input
channels are in LCR mode, the STEREO (L/R) channels and the MONO (C) channel can be
used together as a set of three output channels.
M
O
N
ST
MIX MATRIX CUE
O
1 2 2324 L R (C) 1 2 7 8 L R
MATRIX channel
These channels process the signals sent from input channels, MIX channels, and STEREO/
MONO channels to MATRIX buses, and send them to the corresponding output ports.
M
O
N
ST
MIX MATRIX CUE
O
L R (C)
1 2 2324 1 2 7 8 L R
• 4 BAND EQ (4 band equalizer)
A parametric EQ with four bands: HIGH, HIGH MID, LOW MID, and LOW.
• DYNAMICS 1
This is a dynamics processor that can be used as a compressor, expander, or compander.
Adjusts the output level of the channel.
Turns the output channel on or off. If this is off, the corresponding channel will be
muted.
49
OUTPUT channels
• LEVEL
• ON (On/off)
Reference Manual