Huawei NetEngine5000E Configuration Manual page 95

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Configure available routes between the router and the NM stations. Details for the configuration
procedure are not provided here.
Step 2 Enable the SNMP agent.
<HUAWEI> system-view
[~HUAWEI] snmp-agent
[~HUAWEI] commit
Step 3 Configure the router to run SNMPv1.
[~HUAWEI] snmp-agent sys-info version v1
[~HUAWEI] commit
Step 4 Configure the NM stations access rights.
# Configure an ACL to allow NMS2 to manage and disallow NMS1 from managing the
router.
[~HUAWEI] acl 2001
[~HUAWEI-acl-basic-2001] rule 5 permit source 1.1.1.2 0.0.0.0
[~HUAWEI-acl-basic-2001] rule 6 deny source 1.1.1.1 0.0.0.0
[~HUAWEI-acl-basic-2001] commit
[~HUAWEI-acl-basic-2001] quit
# Configure a MIB view and allow NMS2 to manage every MIB object except HGMP on the
router.
[~HUAWEI] snmp-agent mib-view excluded allexthgmp 1.3.6.1.4.1.2011.6.7
[~HUAWEI] commit
# Configure a community name to allow NMS2 to manage the objects in the MIB view.
Issue 01 (2011-10-15)
Enable the SNMP agent.
Configure the router to run SNMPv1.
Configure an ACL to allow NMS2 to manage every MIB object except HGMP on the
router.
Configure the trap function to allow the router to send alarms to NMS2.
Configure the contact information of the equipment administrator on the router.
Configure NMS2.
SNMP version
Community name
ACL number
IP address of the NM station
Contact information of the equipment administrator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 SNMP Configuration
87