Huawei NetEngine5000E Configuration Manual page 87

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
Step 5 Run:
quit
Return to the system view.
Step 6 Run:
snmp-agent mib-view { excluded | included } view-name oid-tree
A MIB view is created, and manageable MIB objects are specified.
By default, an NM station has rights to access the objects in the Viewdefault view.
l excluded: If a few MIB objects on the device or some objects in the current MIB view do
l included: If a few MIB objects on the device or some objects in the current MIB view need
Step 7 Run:
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view read-view
| write-view write-view | notify-view notify-view ]
The read and write permission is configured for the user group.
l read-view needs to be configured in the command if the NM station administrator needs the
l notify-view needs to be configured in the command if you want to filter out irrelevant alarms
l authentication or privacy can be configured in the command to improve security. If
l If some NM stations that are in the same SNMPv3 user group need to have rights to access
l acl: If all the NM stations that are in the same SNMPv3 user group need to manage specified
Step 8 Run:
commit
The configuration is committed.
----End
Follow-up Procedure
After the access rights are configured, especially after the IP address of the NM station is
specified, if the IP address changes (for example, the NM station changes its location, or IP
Issue 01 (2011-10-15)
not or no longer need to be managed by the NM station, excluded needs to be specified in
the command to exclude these MIB objects.
to be managed by the NM station, included needs to be specified in the command to include
these MIB objects.
read permission in the specified view in some cases. For example, a low-level administrator
needs to read certain data. write-view needs to be configured in the command if the NM
station administrator needs the read and write permissions in the specified view in some
cases. For example, a high-level administrator needs to read and write certain data.
and configure the managed device to send only the alarms of specified MIB objects to the
NM station. If the parameter is configured, only the alarms of the MIB objects specified by
notify-view is sent to the NM station.
authentication is configured, only authentication is performed. If privacy is configured,
both authentication and privacy are performed.
the objects in the Viewdefault view, [ read-view read-view | write-view write-view | notify-
view notify-view ] does not need to be configured in the command.
objects on the device, acl acl-number does not need to be configured in the command.
If some of the NM stations that are in the same SNMPv3 user group need to manage specified
objects on the device, then mib-view and acl need to be configured in the command.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 SNMP Configuration
*
[ acl acl-number ]
79