HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
The sampling mode and sampling ratio are configured for the interface.
By default, NetStream is disabled from packet sampling.
Step 5 Run:
ip netstream { inbound | outbound }
NetStream is enabled on the interface. Statistics about packets' BGP next-hop information can
also be collected. Original flows output in V5 format.
By default, NetStream is disabled from collecting the statistics about incoming and outgoing
unicast flows.
Step 6 Run:
commit
The configuration is committed.
----End
6.3.6 Checking the Configuration
In routine maintenance or after NetStream configurations are complete, you can run the
following commands in any view to view the running status of NetStream functions.
Procedure
l
l
l
----End
Example
Run the display ip netstream cache origin slot 3 command. If NetStream is successfully
configured, you can view various statistics about IP packets cached in the NetStream buffer on
the router.
<HUAWEI> display ip netstream cache origin slot 3
Show information of IP and MPLS cache of slot 3 is starting.
get show cache user data success.
DstIf
SrcIf
NextHop
DstIP
SrcIP
BGP: BGP NextHop
Label1
Label2
Issue 01 (2011-10-15)
NOTE
The sampling mode and sampling ratio configured in the system view are applicable to all interfaces on
the device. The sampling mode and sampling ratio configured in the interface view takes precedence over
those configured in the system view.
Run the display ip netstream cache origin slot slot-id command to check information
about the NetStream buffer.
Run the display ip netstream statistics slot slot-id command to view statistics about
NetStream flows.
Run the display netstream { all | global | interface interface-type interface-number }
command to check NetStream configurations in different views.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
DstP
Msk
Pro Tos Flags
SrcP
Msk
Exp1
Bottom1
Exp2
Bottom2
6 NetStream Configuration
Packets
Direction
DstAs
SrcAs
TopLabelType
136
Need help?
Do you have a question about the NetEngine5000E and is the answer not in the manual?