Huawei NetEngine5000E Configuration Manual page 12

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
l
l
----End
Checking the Configuration
After the power-off operation, run the display device command. If the slave MPU is in the
abnormal state, it means that the operation succeeds. For example:
<HUAWEI> display device
Total Chassis Number: 1
Central Chassis Number: 0
Line Chassis Number: 1
Chassis ID: clc0
Device status:
---------------------------------------------------------------------------
Slot #
---------------------------------------------------------------------------
2
9
11
16
17
18
19
20
21
22
23
24
25
27
28
---------------------------------------------------------------------------
Issue 01 (2011-10-15)
Before powering off the MPU, you need to run the display device command to view
the status of the MPU. If the MPU is the master MPU, perform the master/slave
switchover first.
3. Run the quit command to return to the system view
4. Run the power off slot slot-id-mpu command to power off the slave MPU.
NOTE
If there is no terminal on the deployment site, you can power off the slave MPU by pressing the OFL
button. The OFL button is on the upper part of the panel for the slave MPU. Press and hold the button
for six seconds till the OFL indicator lights. This indicates that the slave MPU is powered off.
Powering off the SFU
1. Run the power off slot slot-id-sfu command to power off the SFU.
NOTE
If there is no terminal on the deployment site, you can power off the SFU by pressing the OFL button.
The OFL button is on the upper part of the panel of the SFU board. Press and hold the button for six
seconds till the OFL indicator lights. This indicates that the SFU is powered off.
Powering off the LPU
After preparing a spare LPU, you can power off the LPU.
1. Run the power off slot slot-id-lpu [ card card-id ] command to power off the LPU.
NOTE
If there is no terminal on the deployment site, you can power off the LPU by pressing the OFL button.
The OFL button is in the upper part of the panel of the LPU. Press and hold the button for six seconds.
If the OFL indicator lights, it indicates that the LPU is powered off.
Type Online
LPU Present
LPU Present
LPU Present
LPU Present
MPU Present
MPU Present
SFU Present
SFU Present
SFU Present
SFU Present
CLK Present
CLK Present
PWR Present
FAN Present
FAN Present
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Register Status
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Unregistered Abnormal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
Registered Normal
1 Device Management
Role LrId Primary
LC 0 NA
LC 0 NA
LC 0 NA
LC 0 NA
MMB 0 Master
MMB 0 Slave
OTHER 0 NA
OTHER 0 NA
OTHER 0 NA
OTHER 0 NA
OTHER 0 Master
OTHER 0 Slave
OTHER 0 NA
OTHER 0 NA
OTHER 0 NA
4