Table of Contents
Advertisement
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
[~HUAWEI-alarm-mask1] commit
# After the configuration is complete, run the display this command in the mask1 view to verify
the configuration.
[~HUAWEI-alarm-mask1] display this
mask alarm-name PmThresholdAlarm
mask severity Minor
mask severity Warning
return
Step 4 Apply the alarm filtering table.
# Configure the NMS host named target-host1 to use the alarm filtering table named mask1.
[~HUAWEI-alarm-mask1] quit
[~HUAWEI-alarm] snmp target-host target-host1 mask name mask1
[~HUAWEI-alarm] commit
# After the configuration is complete, run the display this command in the alarm management
view to verify the configuration.
[~HUAWEI-alarm] display this
snmp target-host target-host1 mask name mask1
----End
Example
#
sysname HUAWEI
#
alarm
suppression name hwBfdSessReachLimit cause-period 5
suppression name hwBfdSessReachLimit clear-period 15
alarm name hwBfdSessReachLimit severity Critical
snmp target-host target-host1 mask name mask1
#
mask name mask1
mask severity Minor
mask severity Warning
mask alarm-name PmThresholdAlarm
#
return
Related Tasks
5.3 Configuring FM
Issue 01 (2011-10-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Fault Management
123
Advertisement
Table of Contents
