Table of Contents
Advertisement
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
Figure 6-10 Networking diagram of MPLS flow statistics collection
Context
Before collecting statistics about MPLS IPv4 packets, complete the following task:
l
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Output statistics about MPLS IPv4 packets in the form of original flows or aggregated flows as
needed.
l Statistics about original flows
Issue 01 (2011-10-15)
NSC
Traffic
Enabling MPLS on the device and interfaces, and configuring the MPLS network
NOTE
MPLS original flows and aggregated flows can be output only in V9 format.
1.
Run:
ip netstream mpls-aware { label-only | ip-only | label-and-ip }
Statistics collection of MPLS packets is enabled.
When sampling MPLS packets, choose one of the following sampling modes as needed:
– To sample only MPLS labels, not inner IP packets, configure label-only.
– To sample only inner IP packets, not MPLS labels, configure ip-only.
– To sample both MPLS labels and inner IP packets, configure label-and-ip.
2.
For other configurations, see
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NDA
NSC
NDE
NDE
6.3 Collecting Statistics About IPv4 Original
6 NetStream Configuration
NDA
Flows.
170
Advertisement
Table of Contents
