Huawei NetEngine5000E Configuration Manual page 130

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
Configuration Roadmap
The configuration roadmap is as follows:
l
l
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Enter the alarm management view.
<HUAWEI> system-view
[~HUAWEI] alarm
Step 2 Configure the severity and suppression period of the alarm named hwOpticalInvalid.
# Set the severity of the alarm named hwOpticalInvalid to Critical.
[~HUAWEI-alarm] alarm name hwbfdSessReachLimit severity critical
# Set the generation period to 5s and clearing period to 15s for the alarm named hwOpticalInvalid
in alarm suppression.
[~HUAWEI-alarm] suppression name hwBfdSessReachLimit cause-period 5
[~HUAWEI-alarm] suppression name hwBfdSessReachLimit clear-period 15
[~HUAWEI-alarm] commit
After the configuration is complete, run the display alarm information name
hwBfdSessReachLimit command to verify the configuration.
[~HUAWEI-alarm] display alarm information name hwBfdSessReachLimit
alarmDictionaryQuery
--------------------------------------------------------------------------------
feature
alarmName
alarmId
severity
cause suppress time : 5
clear suppress time : 15
--------------------------------------------------------------------------------
Step 3 Edit the alarm filtering table.
# Create an alarm filtering table named mask1 and enter the mask1 view.
[~HUAWEI-alarm] mask name mask1
# Configure filtering rules.
[~HUAWEI-alarm-mask1] mask feature-name PMSERVER
[~HUAWEI-alarm-mask1] mask severity minor
[~HUAWEI-alarm-mask1] mask severity warning
Issue 01 (2011-10-15)
Configure a suppression period for an alarm
Edit and applying an alarm filtering table
Alarm name
Alarm suppression period
Name of the alarm filtering table
Alarm severity
Name of the NMS host
: BFD
: hwBfdSessReachLimit
: 152043522
: Critical
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Fault Management
122