Table of Contents
Advertisement
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
l
Procedure
l
l
----End
Issue 01 (2011-10-15)
Packets are sampled at the set sampling ratio, regardless of packet types. For example, if
the sampling ratio in fixed packet sampling mode is set to 1000:1, one packet will be
sampled every 1000 packets, regardless of these packets are IPv4 or IPv6 packets.
Configure the distributed NetStream service processing mode.
1.
Run:
system-view
The system view is displayed.
2.
Run:
slot slot-id
The view of the slot where the LPU for NetStream sampling resides is displayed.
3.
Run:
ip netstream sampler to slot self
The distributed NetStream service processing mode is configured.
4.
Run:
commit
The configuration is committed.
Configure the integrated NetStream service processing mode.
1.
Run:
system-view
The system view is displayed.
2.
Run:
slot slot-id
The view of the slot where the LPU for NetStream sampling resides is displayed.
3.
Run:
ip netstream sampler to slot slot-id1
The integrated NetStream service processing mode is configured and the NetStream
service processing board is specified.
4.
(Optional) Run:
ip netstream sampler to slot slot-id2 backup
The integrated NetStream service processing mode is configured and the backup
NetStream service processing board is specified.
If there are several NetStream service processing boards, you can specify a master
service processing board and a backup service processing board as needed. For the
purpose of load balancing, LPUs that are dual homed to different NetStream service
processing boards can back up each other.
5.
Run:
commit
The configuration is committed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NetStream Configuration
141
Advertisement
Table of Contents
