Monitoring The Netstream Operating Status - Huawei NetEngine5000E Configuration Manual

HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
Context
Commands for aging IPv4 and IPv6 original flows are different. Therefore, use a proper
command as needed.
Before forcibly aging original flows in the buffer, run the undo ip netstream { inbound |
outbound } command or the undo ipv6 netstream { inbound | outbound } command in the
interface view to temporarily disable the sampling function. Otherwise, within 30 seconds after
the reset ip netstream cache command or the reset ipv6 netstream cache command is run,
sampled original flows are forcibly output without aggregation.
The sampling function can be re-enabled 30 seconds after the reset ip netstream cache
command or the reset ipv6 netstream cache command is run.
Procedure
l
l
l
----End

6.10.2 Monitoring the NetStream Operating Status

In routine maintenance, you can run the following command in any view to check the NetStream
operating status.
Procedure
l
l
l
l
Issue 01 (2011-10-15)
CAUTION
Run:
system-view
The system view is displayed.
Run:
reset ip netstream cache slot slot-id
IPv4 original flows in the buffer are forcibly aged.
Run:
reset ipv6 netstream cache slot slot-id
IPv6 original flows in the buffer are forcibly aged.
Run:
display ip netstream cache origin slot slot-id
Information about the NetStream flow buffer is displayed.
Run:
display ip netstream statistics slot slot-id
Statistics about NetStream flows are displayed.
Run:
display netstream { all | global | interface interface-type interface-number }
NetStream configurations in different views are displayed.
Run:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NetStream Configuration
177