Table of Contents
Advertisement
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
Figure 3-9 Networking diagram for configuring a device to communicate with an NM station
by using SNMPv3
1.1.1.1/24
1.1.1.2/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
l
l
Procedure
Step 1 Configure available routes between the router and the NM stations. Details for the configuration
procedure are not provided here.
Step 2 Configure the SNMP agent.
<HUAWEI> system-view
[~HUAWEI] snmp-agent
Issue 01 (2011-10-15)
NMS1
IP Network
NMS2
Enable the SNMP agent.
Configure the router to run SNMPv3.
Configure an ACL to allow NMS2 to manage every MIB object except HGMP on the
router and configure data encryption.
Configure the trap function to allow the router to send alarms to NMS2.
Configure the contact information of the equipment administrator.
Configure NMS2.
SNMP version
User group name
User name and password
Authentication and privacy algorithms
ACL number
IP address of the NM station
Contact information of the equipment administrator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/0
1.1.2.1/24
Router
3 SNMP Configuration
94
Advertisement
Table of Contents
