Download  Print this page

Easy Operation Mode Setting (easy Setting Mode) - Mitsubishi Electric FR-E700 Basic Instruction Manual

Hide thumbs

Advertisement

Operation panel
3.2.3

Easy operation mode setting (easy setting mode)

Setting of Pr. 79 Operation mode selection according to combination of the start command and speed command can be
easily made.
Operation
Start command: external (STF/STR), frequency command: operate with
example
1.
Screen at powering ON
The monitor display appears.
2.
Press
and
3.
Turn
until
(refer to the table below for other settings)
4.
Press
to set.
REMARKS
is displayed ... Why?
Pr. 79 is not registered in user group with "1" in Pr. 160 User group read selection.
Parameter write is disabled with "1" set in Pr. 77.
is displayed ... Why?
Setting can not be made during operation. Turn the start switch (
Press
before pressing
operation mode when performed in the PU operation mode (PU JOG operation mode) and PU operation mode when performed
in the External operation mode.
Reset can be made with
The priorities of the frequency commands when Pr. 79 = "3" are "Multi-speed operation (RL/RM/RH/REX) > PID control (X14) >
terminal 4 analog input (AU) > digital input from the operation panel".
34
Operation
for 0.5s.
appears.
Operation Panel Indication
Flickering
Flickering
Flickering
Flickering
Flickering
Flickering
Flickering
Flickering
to return to the monitor display without setting. In this case, the mode changes to External
.
Operation Method
Start command
Frequency command
External
Analog
(STF, STR)
voltage input
External
(STF, STR)
Analog
voltage input
Flicker ··· Parameter setting complete!!
The monitor display appears after 3s.
, STF or STR) OFF.
Display
Flickering
Flickering
Flickering

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric FR-E700

This manual is also suitable for:

Fr-e720-0.1kFr-e740-0.4kFr-e720s-0.1kFr-e710w-0.1k

Comments to this Manuals

Symbols: 0
Latest comments: