Download  Print this page

Operation Lock (press [mode] For A While (2s)) - Mitsubishi Electric FR-E700 Basic Instruction Manual

Hide thumbs

Advertisement

3.2.4

Operation lock (Press [MODE] for a while (2s))

Operation using the setting dial and key of the operation panel can be set invalid to prevent parameter change, and
unexpected start or frequency setting.
Set "10 or 11" in Pr. 161, then press
When the setting dial and key operation is made invalid,
and key operation is invalid,
key operation is not performed for 2s, the monitor display appears.)
To make the setting dial and key operation valid again, press
POINT
Set "10 or 11" (key lock mode valid) in Pr. 161 Frequency setting/key lock operation selection.
Operation
1.
Screen at powering ON
The monitor display appears.
2.
Press
to choose the PU operation mode.
3.
Press
to choose the parameter setting
mode.
4.
Turn
until
5.
Press
to read the currently set value.
"
" (initial value) appears.
6.
Turn
to change it to the set value "
7.
Press
to set.
8.
Press
for 2s to show the monitor mode.
Note
Release the operation lock to release the PU stop by key operation.
for 2s to make the setting dial and key operation invalid.
appears if the setting dial or key operation is performed. (When the setting dial or
(Pr. 161) appears.
".
Flicker ··· Parameter setting complete!!
Press for 2s.
Functions valid even in the
operation lock status
Stop and reset with
Operation panel
appears on the operation panel. When the setting dial
for 2s.
Display
PU indication is lit.
PRM indication is lit.
(The parameter number read previously appears.)
.
3
35

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric FR-E700

   Related Content for Mitsubishi Electric FR-E700

This manual is also suitable for:

Fr-e720-0.1kFr-e740-0.4kFr-e720s-0.1kFr-e710w-0.1k

Comments to this Manuals

Symbols: 0
Latest comments: