Monitoring Of Output Current And Output Voltage; First Priority Monitor; Setting Dial Push - Mitsubishi Electric FR-E700 Basic Instruction Manual

Operation panel
3.2.5

Monitoring of output current and output voltage

POINT
Monitor display of output frequency, output current and output voltage can be changed by pressing
monitoring mode.
Operation
1.
Press during operation to choose the
output frequency monitor
2.
Independently whether the inverter is running in
any operation mode or at a stop, the output
current monitor appears by pressing
3.
Press to show the output voltage
monitor.
3.2.6

First priority monitor

Hold down for 1s to set monitor description appears first in the monitor mode.
(To return to the output frequency monitor, hold down
3.2.7

Setting dial push

Press the setting dial (
* Appears when PU operation mode or External/PU combined operation mode 1 (Pr. 79 = "3") is selected.
36
.
) to display the set frequency∗ currently set.
for 1s after displaying the output frequency monitor.)
during
Display
Hz is lit
A is lit
Hz/A turns OFF.