Product Checking And Parts Identification - Mitsubishi Electric FR-E700 Basic Instruction Manual

1 PRODUCT CHECKING AND PARTS IDENTIFICATION

Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter type
FR -
E740
No. Voltage class
Three-phase 200V class
E720
E740 Three-phase 400V class
E720S Single-phase 200V class
E710W Single-phase 100V class
Operation panel
(Refer to page 32)
PU connector
(Refer to page 18)
Voltage/current input switch
(Refer to page 16)
USB connector cover
(Refer to page 25)
Front cover
(Refer to page 4)
PU connector cover
(Refer to page 23)
Capacity plate *
FR-E740-3.7K
• Accessory
· Fan cover fixing screws (M3 × 35mm)
These screws are necessary for compliance with the European Directive (Refer to page 135)
FR-E720-1.5K to 3.7K, FR-E740-1.5K to 3.7K, FR-E720S-0.75K to 2.2K
FR-E720-5.5K to 15K, FR-E740-5.5K to 15K
Harmonic suppression guideline (when inverters are used in Japan)
All models of general-purpose inverters used by specific consumers are covered by "Harmonic suppression guideline for consumers who
receive high voltage or special high voltage". (For further details,
-
3.7 K
Represents the
inverter capacity [kW]
Inverter type
Serial number
* Location of the capacity plate and the rating plate differs according to the inverter capacity.
Refer to the outline dimension drawing.(Refer to page 128)
Capacity
Changing the control
logic jumper connector
(Refer to page 19)
Combed shaped wiring
cover
(Refer to page 6)
Rating plate *
FR-E740-3.7K
Inverter type
Input rating
Output rating
Serial number
Number
1
2
refer to the chapter 3 of the Instruction Manual (applied).)
Cooling fan
(Refer to page 121)
USB connector
(mini-B connector)
(Refer to page 18)
Connector for plug-in
option connection
(Refer to the instruction
manual of options.)
Standard control circuit
terminal block
(Refer to page 16)
Main circuit
terminal block
(Refer to page 10)
1
1