Mitsubishi Electric FR-E700 Basic Instruction Manual page 71

Make a start and stop with terminals (external operation)
REMARKS
Pr. 178 STF terminal function selection must be set to "60" (or Pr. 179 STR terminal function selection must be set to "61").
(all are initial values)
When Pr. 79 Operation mode selection is set to "3", multi-speed operation (Refer to page 63) is also valid.
Pressing
1. Turn the start switch (STF or STR) OFF.
2. The display can be reset by
62
to stop the motor and the display shows
.
.