Download  Print this page

Specifications; Rating - Mitsubishi Electric FR-E700 Basic Instruction Manual

Hide thumbs

Advertisement

6 SPECIFICATIONS

6.1

Rating

Three-phase 200V power supply
Type FR-E720- K(-C)
Applicable motor capacity (kW)
Rated capacity (kVA)
∗2
Rated current (A)
∗6
Overload current rating
∗3
Voltage
∗4
Rated input
AC (DC) voltage/frequency
Permissible AC (DC) voltage
fluctuation
Permissible frequency fluctuation
Power supply capacity (kVA)
Protective structure (JEM1030)
Cooling system
Approximate mass (kg)
Three-phase 400V power supply
Type FR-E740- K(-C)
Applicable motor capacity (kW)
Rated capacity (kVA)
∗2
Rated current (A)
∗6
Overload current rating
∗3
Voltage
∗4
Rated input voltage/frequency
Permissible AC voltage fluctuation
Permissible frequency fluctuation
Power supply capacity (kVA)
Protective structure (JEM1030)
Cooling system
Approximate mass (kg)
∗1
The applicable motor capacity indicated is the maximum capacity applicable for use of the Mitsubishi 4-pole standard motor.
∗2
The rated output capacity indicated assumes that the output voltage is 230V for three-phase 200V class and 440V for three-phase 400V class.
∗3
The % value of the overload current rating indicated is the ratio of the overload current to the inverter's rated output current. For repeated duty, allow time for
the inverter and motor to return to or below the temperatures under 100% load.
∗4
The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range. However,
the pulse voltage value of the inverter output side voltage remains unchanged at about
∗5
The power supply capacity varies with the value of the power supply side inverter impedance (including those of the input reactor and cables).
∗6
Setting 2kHz or more in Pr. 72 PWM frequency selection to perform low acoustic noise operation in the surrounding air temperature exceeding 40°C (totally-
enclosed structure is 30°C), the rated output current is the value in parenthesis.
∗7
Connect DC power supply to terminal P/+ and N/-. Connect the plus side of the power supply to terminal P/+ and minus side to terminal N/-.
Since the voltage between P/+ and N/- may increase due to the regeneration energy from the motor and exceeds 415V temporarily, select the DC power
supply which can withstand the voltage/energy during regeneration. If using the power supply which can not withstand voltage/energy during regeneration,
insert diodes in series for reverse current prevention.
Although the FR-E700 series has the built-in inrush current limit circuit, select the DC power supply considering the inrush current at powering ON as the
inrush current four times of the rated inverter flows at powering ON.
Since the power supply capacity depends on the output impedance of the power, select the power supply capacity which has enough allowance according
to the AC power supply system capacity.
∗8
Totally enclosed structure series ends with -C.
0.1
0.2
0.4
∗8
0.1
0.2
0.4
∗1
0.3
0.6
1.2
0.8
1.5
3
(0.8)
(1.4)
(2.5)
Three-phase 200 to 240V 50Hz/60Hz (283 to 339VDC
0.4
0.8
1.5
∗5
Enclosed type (IP20). IP40 for totally enclosed structure series.
Self-cooling
0.5
0.5
0.7
0.4
0.75
∗8
0.4
0.75
∗1
1.2
2.0
1.6
2.6
(1.4)
(2.2)
1.5
2.5
∗5
Enclosed type (IP20). IP40 for totally enclosed structure series.
Self-cooling
1.4
1.4
0.75
1.5
2.2
0.75
1.5
2.2
2.0
3.2
4.4
5
8
11
17.5
(4.1)
(7)
(10)
(16.5)
150% 60s, 200% 3s (inverse-time characteristics)
Three-phase 200 to 240V
170 to 264V 50Hz/60Hz (240 to 373VDC
±5%
2.5
4.5
5.5
1.0
1.4
1.4
1.5
2.2
3.7
1.5
2.2
3.7
3.0
4.6
7.2
4.0
6.0
9.5
(3.8)
(5.4)
(8.7)
150% 60s, 200% 3s (inverse-time characteristics)
Three-phase 380 to 480V
Three-phase 380 to 480V 50Hz/60Hz
325 to 528V 50Hz/60Hz
±5%
4.5
5.5
9.5
Forced air cooling
1.9
1.9
1.9
that of the power supply.
2
Rating
3.7
5.5
7.5
11
3.7
5.5
7.5
11
7.0
9.5
13.1
18.7
24
33
47
(23)
(31)
(44)
)
∗7
)
∗7
9
12
17
20
Forced air cooling
1.7
4.3
4.3
9.0
5.5
7.5
11
5.5
7.5
11
9.1
13.0
17.5
12
17
23
12
17
20
3.2
3.2
5.9
15
15
23.9
60
(57)
28
9.0
15
15
23.0
30
28
5.9
6
125

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric FR-E700

This manual is also suitable for:

Fr-e720-0.1kFr-e740-0.4kFr-e720s-0.1kFr-e710w-0.1k

Comments to this Manuals

Symbols: 0
Latest comments: