Figure 3.21 Setting Jumpers And Switches On The Tepri2 Module - Samsung OfficeServ 7400 Installation Manual

CHAPTER 3. Installing and Replacing Modules
Setting Jumpers
Jumpers are numbered in ascending order from that marked '1' above.
J1 and J2: Connect #1 and #2 for E1 cable, or #2 and #3 for T1 cable.
JP3, 4, 5, 6, 7, 8, 9: Connect #2 and #3 for E1/PRI, or #1 and #2 for T1
3.3.1.4 TEPRI2 Module
The TEPRI2 module provides a digital C.O. line, supports E1, T1 and two ISDN PRI ports,
and provides the Q-SIG function.
Setting Switches
Set S2 and S3 switches and jumpers on the TEPRI2 module as follows:
1
1
J2
J1
J3

Figure 3.21 Setting Jumpers and Switches on the TEPRI2 Module

3-16
1
1
J4
S2 OFF
1 E1
2 T1/E1
3 24B + D
4 User
S3 OFF
1 Not used
2 T1/E1
3 24B + D
4 User
© Samsung Business Communications
ON
4
1
OFF
S2
4
1
S3
ON
T1
PRI
24B
Network
ON
Not used
PRI
24B
Network