Mounting Control Modules; Table 3.6 Mounting Control Modules - Samsung OfficeServ 7400 Installation Manual

3.2.3 Mounting Control Modules

Mount LP40 and MP40 control modules in slots 0 and 3, respectively, of the basic chassis.
For an expansion chassis, LP40 is mounted in slot 0. For slot numbers, see Figure 3.2.
Control Module
MP40
LP40
The procedure for mounting the MP40 module and the LP40 module in each slot is as fol-
lows:
1) Align the MP40 module to the guardrail of slot 3 of the basic chassis and slide the
module into the slot.
© Samsung Business Communications

Table 3.6 Mounting Control Modules

Slot 3 of the basic chassis
Slot 0 of the basic/expansion chassis
Make sure the chassis power is OFF before mounting modules. Inserting or eject-
ing a module while the power is on may damage the module or cause a fire.
Figure 3.8 Mounting the MP40 Control Module in Slot 3
OfficeServ 7400 Installation Guide
Slot / Chassis
3-7