DECT 500 System
Hardware Configuration Overview
The DECT 500 system is an "add on" to existing or new PABX installations. The sys-
tem can handle up to eight cordless handsets.
It comprises a Base Station/Control Unit (CCFP) and a number of Portable Parts
(PP, handsets). It may also include up to six Repeaters (WRFP). The RS-232 con-
nector can be used to connect a PC or a modem for programming, etc.
PSTN lines
PABX
•
Connect up to
8 handsets
The Base Station supports six simultaneous handset calls.
Setting Optional Password Protection
An optional password protection feature can be enabled which requires a password
to be entered before the administration program can be accessed. The feature is dis-
abled by default by a plastic jumper mounted on the ALT connector on the CCFP
main board (Figure 2.8).
To enable password protection, remove the jumper from the connector and set a
password using the administration program.
Part 2: DECT Hardware Installation and Programming
•
The Base Station/Control Unit
(CCFP) is placed strategically
for optimal coverage and where
traffic channels are needed
Base Station
8 a/b lines
RS-232
(PC, Modem,
MSF, etc.)
Figure 2.7 DECT 500 System
•
6 repeaters can be con-
nected to increase radio
coverage
Repeater
33