CHAPTER 5. Connecting Power Cables
5.2 Connecting Power Cables
Follow the procedure for a basic chassis only or for a basic plus expansion chassis configu-
ration. However, do not switch on the power until you have completed the installation and
are ready to begin operation (see Chapter 8).
Single Chassis Configuration
Use the power cable provided with the OfficeServ 7400 system to connect the input power
terminal on the rear panel of the basic chassis to a grounded outlet
Basic Plus Expansion Chassis Configuration
Connect the input power cable for each chassis to a grounded outlet.
5-2
Figure 5.1 Connecting the Power to a Basic Chassis
Figure 5.2 Connecting the Power to a Basic and Expansion Chassis
Expansion
Chassis
Basic Chassis
© Samsung Business Communications