Samsung OfficeServ 7400 Installation Manual page 63

CHAPTER 7. Connecting Stations and Additional Equipment
Therefore, IP phones must be supported by the MGI/MGI64 module, allowing access to the
LAN.
7.1.4.1 Connecting Modules to Ethernet
The modules GWIM / GSIM / GPLIM / LIM / PLIM/ 4DSL / MGI / MGI64 / MP40 /
LP40 / TEPRI2 / SVMi-20E can be connected to Ethernet using an Ethernet cable.
LIM Module - All ports (P1~P16)
GWIM Module - All ports (P1, P2, P3)
GSIM Module - All ports (P1~P10)
GPLIM Module - All ports (P1~P14)
Since all ports of the GWIM and GSIM and the Up Link ports (P13, P14) of the
GPLIM only support the SFP type 1000 Base SX/LX/TX, to connect the 10/100 Base
T with the RJ45 connector use the P1~P12 ports of GPLIM.
4DSL Module - Up Link port (LAN)
MP40, LP40, MGI, MGI64, TEPRI2 and SVMi-20E Modules - LAN port
7-6
OfficeServ 7400
Figure 7.12 Connecting IP Phones
Figure 7.13 RJ-45 Ethernet Connection Port (Module)
Switching Hub
© Samsung Business Communications