CHAPTER 2.
This chapter describes how to install an OfficeServ 7400 chassis in a rack.
2.1 Overview of System Installation Procedure
The general installation procedure is as follows (each step is described in detail later):
1) Install the OfficeServ chassis inside a rack.
2) Earth to the ground lug behind the basic chassis.
3) Insert the LP40 module into slot 0 of the basic chassis. If there is an expansion chassis,
insert the LP 40 module into slot 0 of that.
4)
Insert the MP40 module into slot 3 of the basic chassis
5) Mount interface modules in the universal slots (1 to 11).
6) Connect an external battery.
7) Connect AC input power.
.
© Samsung Business Communications
Installing Chassis
Slot 0
Slot 1
Slot 3
Slot 4
Slot 6
Slot 7
Slot 9
Slot 10
Figure 2.1 Chassis Front Panel
OfficeServ 7400 Installation Guide
Slot 2
Slot 5
Slot 8
Slot 11
2-1