Connecting A Wireless Lan Access Point; Table 7.2 Specification For Wireless Lan Equipment Connection - Samsung OfficeServ 7400 Installation Manual

Pin No.
Function Tx+
The use of a LIM port as an Uplink requires the use of a twisted LAN cable.
7.1.4.2 Mounting Gigabit Module of Switching Module
GPLIM, GSIM, and GWIM modules provide a Gigabit Interface, and by using the SFP
(Small Form-factor Pluggable) connector supports 1000 BASE-TX/SX/LX. Therefore, it is
important to mount the correct specification of module, and connect between each module
with the same kind of cable.
1000 BASE-TX SFP Module - UTP Cable
1000 BASE-SX - MMF Optic Cable
1000 BASE-SX - SMF Optic Cable

7.1.5 Connecting a Wireless LAN Access Point

The Wireless LAN service offered by the OfficeServ 7400 system requires:
4WLI module mounted in the system for WBS24 (Combo) connection
OR
MGI module mounted in the system for WBS24 (Basic) connection
WBS24: Wireless LAN Access Point (AP)
WIP-5000M: Wireless LAN IP phone
Number of 4WLI Modules
Max. Number of WBS24 APs
Max. Number of Users
Number of Simultaneous Users
© Samsung Business Communications
1 2 3
Tx- Rx+

Table 7.2 Specification for Wireless LAN Equipment Connection

Items
4 5
- -
RJ-45 Port
OfficeServ 7400 System
(Basic Chassis and Basic + Expansion Chassis)
120
OfficeServ 7400 Installation Guide
6 7
Rx- -
3
12
48
8
-
7-7