Connecting An Mp40 Module To An Officeserv 7200 Expansion Chassis; Figure 3.13 Connecting The Mp40 And Lp40 Modules; Figure 3.14 Extension Cable - Samsung OfficeServ 7400 Installation Manual

CHAPTER 3. Installing and Replacing Modules
4) With the third extension cable, connect the 'LINK23' port of the MP40 module and
the'LINK3' port of the LP40 module.
5) For two expansion chassis, connect the 'LINK31', 'LINK32' and 'LINK33' port of the
MP40 module with extension cables in the same way as described above.
3.2.5 Connecting an MP40 Module to an OfficeServ 7200 Expan-
sion Chassis
With the OfficeServ 7400 system as the basic chassis, the expansion chassis of an existing
OfficeServ 7200 system can be connected. To do so, the MP40 module in the 7400 system
and the LCP module in the 7200 system should be connected with an extension cable.
1) Three extension cables are needed to connect the MP40 module to the LCP module.
3-10
LP40
LINK1
LINK3
MISC1
LINK2
PSC
MISC2
LINK21 LINK22
LINK23
MP40

Figure 3.13 Connecting the MP40 and LP40 Modules

Figure 3.14 Extension Cable

© Samsung Business Communications