Uready Settings; Wi-Fi 5G Only Setting; Wi-Fi Hotspot - Samsung SMT-i5343 Manual

Version 1.0

uReady Settings

Select [Menu]  [Settings]  [uReady Settings].
1
Enable/disable the feature and enter detailed information.
2
This feature is available only in an environment where uReady connections are
supported.

Wi-Fi 5G Only Setting

If the Wi-Fi 5G only mode is selected, only the Wi-Fi APs in the 5GHz frequency band
are searched.
Enable [Menu]  [Settings]  [Wi-Fi 5G Only].

Wi-Fi Hotspot

You can use your IP phone as a Wi-Fi hotspot. This is useful if there is no wireless AP
in your environment.
- This feature may not be supported in some systems or countries.
- Up to 3 devices can be connected over Wi-Fi.
- The hotspot feature is supported in wired mode only.
- The use of VoIP over hotspot connection is not guaranteed.
- Abnormal behaviors may occur due to Bluetooth or radio interferences.
- Abnormal behaviors may occur depending on the position of the user due to
radio obstacles, e.g. walls and partitions.
- Access of wireless devices connected to the Wi-Fi hotspot is limited within the
network of the IP phone. The Internet and other external networks may not be
accessible in certain environments.
- Using multiple SMT-i5343 phones in close proximity as Wi-Fi hotspots may
result in interference between Wi-Fi channels.
September 2014
Page | 86