Machine Setup - Pantum M6700 Series User Manual

6.2.2.4.Wi-Fi Direct setup
1. Click "Settings" – "Network settings" – "Wireless setup" – "Wi-Fi Direct".
1) The Wi-Fi Direct defaults to be disabled; to enable it, please select the connection
method "Auto" or "Manual" and then click "Apply".
• If Auto selected, the mobile terminal will realize automatic connection upon
Note：
initiating the connection invitation without the need of confirmation on panel.
• If Manual selected, the mobile terminal cannot realize connection until
initiating the connection invitation prior to confirmation on panel.

6.2.3.Machine setup

You can add mail address contacts, set up e-mail notification, set up sleep time and recover
factory settings via machine setup page.
6.2.3.1.Set up e-mail notification
If you set up e-mail notification, an e-mail will be sent to the mail address specified by you
when abnormality such as paper out occurs. You can receive emails only if you made correct
email setup. Please consult your network administrator for detailed setup steps. You need to
log in the embedded Web server before setting up email notification (please refer to
Chapter 6.1 for login method).
I. Set up SMTP client
1. Click "Settings" – "Network settings" – "Protocol Settings" – "SMTP".
2. On SMTP page, input SMTP server address, set up the mailbox login name
and password and then click "Apply".
II. Add recipient address
1. Click "Settings" – "Machine settings" – "Address Book" .
2. Click "Add", input recipient address and then click "Apply".
III. Set up email notification
1. Click "Settings" – "Machine settings" – "E-mail Notification".
2. Click button and select the email addresses you want to add in the list of contacts
popping out.
You can also tick "address X" (such as address 1) and input the email addresses you
want to add.
3. Tick the email addresses and notification contents you want to notify and then click "Apply".
6.2.3.2.Configure the E-mail address book
If you want to scan a file to an e-mail address, you need to configure the e-mail address book
first and then scan the file to the assigned e-mail address.The e-mail will not be received
before proper setting on the e-mail box; for specific setting steps, please consult your network
administrator.
I. Set the E-mail address book
Log in the embedded Web server (please refer to
1.
2. Click "Settings" – "Machine settings" – "System".
3. Click "Create" to pop out a window as below and edit the contact name and input the e-mail
address, and then click "Apply".
• If some groups have been created, you may click to check a corresponding
Note：
group to add the newly created e-mail address into it.
Chapter 6.1 for login method).
44