Auto Shut-Off Setting - Pantum M6700 Series User Manual

12.1.6.Auto shut-off setting

"Auto shut-off setting" to set off condition and off delay of printer.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "System Setting" option.
3) Press direction key "▲" or "▼" to select options of "Auto off set", press "OK"
to set of condition and off delay.
Note: Set auto off condition:
• Shutdown under no-port state (default configuration): no port is connected,
Wi-Fi function deactivated,printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.
99