Add Printer To Mac System; Add In Usb Connection Mode; Addition In Wired Network Connection Mode - Pantum M6700 Series User Manual

8. Click "Continue Installation" on the prompt window popping out.
9. The system will finish driver installation automatically.
• If USB cable is used to connect the computer and Wi-Fi model, the window to prompt
wireless network setup will pop out during driver installation process, as shown in the
diagram above. Click "Yes" to set up the wireless network of printer with wireless network
setup tool (refer to Chapter
• If USB cable is not used to connect computer with Wi-Fi model or non Wi-Fi
model, the prompt window of wireless network setup will not pop out.
10.Click "Restart" and wait for computer restart to finish installation.
Note： • If the printer and computer have been connected with USB cable, the USB
connection mode will be added to the printer automatically after computer is
restarted.

3.3.Add printer to Mac system

3.3.1.Add in USB connection mode

1. Connect the printer to computer with USB cable and then turn power on.
2. Enter the "System Preferences" – "Printers & Scanners" of computer.
3. Click button to select "Add Printer or Scanner".
4. Select printer and then select the corresponding printer mode from the "Use" menu
popping out.
5. Click "Add".

3.3.2.Addition in wired network connection mode

1. Turn the power of printer and computer on.
2. Connect the computer to wired network.
3. Connect the network cable to the network interface of printer, and make sure the printer is
connected to the computer network (Please refer to Chapter 4 for network setup).
4. Enter the "System Preferences" – "Printers & Scanners" of computer.
5. Click button to select "Add Printer or Scanner".
6. Select printer and then select the corresponding printer mode from the "Use" menu
popping out.
7. Click "Add".
5.1.1).
30