Note:
·
If you do not know the SSID of access point (wireless router), please click
"Print Wireless Network Information Page" to view the SSID of the needed
access point (wireless router).
· If the printer cannot be used normally after wireless network setup is finished,
please install the drive again. Please select "wireless network connection (W)"
as the installation method (please refer to
and
Chapter 3.3.3
3) Use WPS connection Select "No, I have no USB cable" in the interface below and then
click "Next".
1) Tick "Use WPS" and then click "Next". (Please refer to
configuration)
for Mac system).
Chapter 3.1.3
for Windows system
Chapter 5.1.2
for detailed WPS
36