Other Fax Functions - Pantum M6700 Series User Manual

10.3.4. Other Fax Functions

For settings on fax, please see
1. Group Sending
This printer supports sending one original to several fax numbers, with the ability of up
to 20 fax numbers sent to at the same time.
2. Delay Sending
You can enable Delay sending of Fax through the Control Panel. When this process is
complete, the printer will scan the document to the memory, and get back to Ready state.
3. Active Job
You may check or delete the delay sending jobs stored currently with the "Active Job" menu.
4. Receive and forward
You can forward the Fax you receive. When you receive a Fax job, it will be stored in memory
at first. Then the printer dials the Fax number you have specified and send the Fax. If a fax
fails to be forwarded due to busy line or line failure, This printer will print a copy of fax contents
to be forwarded for backup. (If the Redial feature is set, it will print after redialing) .
Please enable "Forward and Print" in enabling the forward function if there is a need of printing
the fax contents to be forwarded.
5. Automatic Redial
If the number you have dialed is busy or is not responding when you send a Fax, the machine
will automatically redial the number. You can set the redial attempts and interval.
6. Auto Shrink
When the paper size of the received Fax does not match the size specified in the printer, the
received Fax will be shrinked according to the user-defined paper size to match the paper size
in the printer.
If you disable the Auto Shrink option, the Fax will be printed at full size across multiple pages.
Auto Shrink is turned on by default.
Note: · Make sure that the default paper size setting is consistent with the size of
the medium loaded in the paper tray.
· Receive in memory: in case of paper out or paper jam, This printer
supports storing all faxes under receiving into its memory automatically; after
handling the paper out or paper jam, it will print all of them automatically.
Chapter 10.2 and Chapter 15.
87