Pantum M6700 Series User Manual page 48

2) Please tick "No" to configure other wireless network needed to connect to. Complete
configuration according to interface prompt.
Note：
At present, the printer supports 3 types of safe modes: none, WEP and
·
WPA/WPA2.
1) None: There is no encryption method used.
2) WEP: Send and receive data via security key by using WEP (Wired
Equivalent Privacy). WEP key is applicable to 64-digit and 128-digit encrypted
network and can contain numbers and letters at the same time.
3) WPA/WPA2: it is the pre-shared key (PSK) of Wi-Fi protected access
which connects wireless device and access point via TKIP or AES encryption
(WPS-Personal). The working length of WPA/WPA2 is within the PSK of 8-63
characters.
· The display password is not ticked by default; if it is ticked, all passwords input
can be seen in clear text.
2.2 The computer is not connected to wireless network Input the SSID (case sensitive) and
password of access point (wireless router) in the interface below. Complete configuration
according to interface prompt.
35