Pantum M6700 Series User Manual page 52

2. Turn on the mobile device and select setup to enter Wi-Fi connection interface.
3. Select "Advanced" and then select "Wi-Fi Direct" in advanced WLAN interface.
4. Select printer SSID on direct interface to launch a connection invitation.
5. Press "OK key" to confirm connection when the panel lead to prompts whether to
connect to start Wi-Fi Direct connection.
• In case of auto connection mode, the mobile device will start to connect
Note：
automatically after initiating connection invitation without panel confirmation.
5.2.2.2.Connection method of wireless client that does not support Wi-Fi Direct
function (input password to connect)
1. Turn on printer power.
2. Press the "Menu key" – "Network Info" – "Wi-Fi dir. Info" on control panel of printer to
view "SSID" and "Password".
3. Turn on the computer or mobile device with wireless network function; select the SSID of
Wi-Fi Direct and input password to connect.
39